Electronic Stepped Attenuator | ePot.V3 Mini
$150.00
The ePot.V3 Mini (the “Mini” ) is a high resolution panel mounted electronic stepped attenuator that offers exceptional sonic performance with advantages that no mechanical attenuator can match including a high resolution 100 step volume control, local & remote control, channel balance adjustment, muting and optional menu driven high contrast OLED display.
The V3.Mini enables the audio hobbyist, professional designer or OEM to build or refurbish passive or active audio preamps that rival the performance of some of the best high end preamp equipment available today regardless of price.
While you can purchase the Mini “bare” without an attenuation module, we pre-select a plug-in LDR (light dependent resistor) attenuation module by default but you can opt for a discrete resistor attenuation module instead, or opt for both. The two module types are interchangeable.
The graphic OLED Display Module (sold separately) integrates with the V25 to provides an easy and intuitive user control experience through an interactive menu driven control interface designed around the 7-button Apple remote.
Out of stock
An electronic stepped attenuator
The ePot.V3 Mini (the “Mini” ) is a panel mounted electronic stepped attenuator that offers exceptional sonic performance with advantages that no mechanical attenuator can match.
The “Mini” is literally a direct physical replacement for any volume potentiometer or mechanical stepped attenuator that through-hole mounts directly into a typical front panel, is secured by a nut and washer, to which you then attach a conventional volume control knob.
The ePot.V3 Mini is intended for any DIYer, designer or OEM who is looking for a high performance volume control alternative to conventional potentiometers or mechanical stepped attenuators.
Features of the ePot.V3 Mini include:
- LDR (light dependent resistor) attenuation module
- 100 step attenuator
- -60 to 0 dB
- programmable impedance | 20k default but any value 1k to 100k can be ordered
- plug-in replaceable module
- Smooth stepping with no sonic artifacts
- No mechanical parts in the signal path
- Remote controlled (Apple infrared remote)
- Manual control via rotary encoder
- Panel mounted via encoder w/ nut and washer – just like any pot or stepped attenuator
- Smooth muting/unmuting
- Left/right channel balance w/ reset (+/- 10 db)
- Optional status LED
- Optional high contrast menu driven OLED display with encoder & IR receiver
- Smaller than a credit card – 2.9″ long x 1.35″ wide x 1.2″ deep
- Can also be chassis mounted with standoffs
- Screw terminal interface for power and audio input/output
Software driven passive analog attenuator
The ePot.V3 Mini is a passive analog volume control device with an active software driven digital heart. It is the successor product to Tortuga Audio’s popular LDR.V25 Preamp Controller which traces its roots back to 2012 and our very first electronic stepped attenuator based on light dependent resistors (LDRs).
While actively controlled, the audio signals passing through the Mini are not directly mixed with or manipulated by any power supply, there is no gain stage and there is no output/buffer stage. The audio signals only see pairs of resistors that control volume by reducing the incoming signal voltage. By this definition the Mini is inherently a passive volume controller.
By itself can be considered a passive preamp. When mated to a downstream gain and/or buffer stage the ePot.V3 Mini can becomes a core part of a high performance active preamp.
What’s included?
The following items are included by default with each Mini.
- ePot.V3 Mini board with attached triple voltage power supply module
- * 20k LDR attenuation module fully calibrated & tested (you can order any impedance from 1k to 100k)
- IR receiver module with 6 inch 3-wire square pin connector cable
- Status LED with 6 inch 2-wire square pin connector cable
* You can opt to purchase the Mini board “bare” without an LDR attenuation module at a reduced cost. However, to be clear, an attenuation module is absolutely needed for the Mini to function.
What’s not included?
You will have to supply the following items:
- Source of DC power. The Mini can be powered from any DC voltage from 9 to 30 VDC and draws no more than 0.3 A of current (with OLED display). Power connection is via screw terminals.
- Apple remote (the silver metal model). You can operate the Mini with just the rotary encoder but you’ll wish you had the remote. Get the remote!
- A knob for the rotary encoder
Optional Items
The following items can be purchased together with the Mini or purchased separately later on:
- Additional LDR attenuation module with nominal impedance from 1k to 100k
- Alternative discrete resistor attenuation module – 60k fixed impedance
- OLED display with integrated IR receiver and connecting ribbon cable
- Apple remote
LDR attenuation module
Like its predecessors, the ePot.V3 offers high performance attenuation using light dependent resistors (LDRs). LDRs offer a very pleasing clean, clear, unveiled, neutral, colorless, yet natural organic sounding volume control with remarkable bass performance. The reader is referred to the following link for a more in depth discussion about LDRs.
The V3 LDR Attenuation Module is a new LDR module design where all 4 LDRs are now mounted together on a single board along with an EEPROM memory chip that holds the impedance and attenuation setting data that are unique to each set of LDRs. The LDR Attenuation Modules plugs directly into either ePot.V3 model.
The LDR Attenuation Module provides 100 attenuation steps of ~ 0.6 dB/step over a -60 to 0 dB attenuation range. While we call them attenuation “steps” the transitions between steps are smoothly continuous since LDRs are themselves true analog devices. There are no audible stepping artifacts and the control is smooth and precise over the full range.
About LDR impedance and calibration
Due to its small size, the Mini is not capable of calibrating its own LDR attenuation module. Therefore is you need an LDR attenuation module with a difference impedance level or to replace a bad module you will need to purchase LDR modules from Tortuga Audio. Alternatively, if you also own an ePot.V3 Max you can use any Max to recalibrate any LDR module at whatever impedance level you wish. If you send in your existing V3 LDR attenuation module, we will recalibrate your module for you for a $5 fee plus return shipping.
For more general information, please refer to this link to read more about LDRs, their impedance and their calibration.
Improved LDR control & calibration
The ePot.V3 introduces a significantly improved LDR control scheme compared to all prior models.
The light source inside a “light” dependent resistor is actually an LED. As with any LED, the light intensity emitted by the LED is directly proportional to the current running through it. And by controlling light intensity you control the resistance level of the LDR. Hence, precise current control is synonymous with precise resistance control. In the past we’ve accomplished this indirectly with voltage control.
With the V3 we have replaced voltage control with precision closed loop LDR current control. Precision current control decouples LDR performance from power supply voltage levels resulting in more predictable, stable and repeatable LDR performance over a wide range of current.
In addition to precision current control, the ePot.V3 also has an improved LDR calibration system that replaces the previous 12 bit system with a simpler yet more precise 16 bit approach. LDR calibration is a built-in feature of the ePot.V3 Max. The reader is referred to the following link for a more in depth discussion of LDR calibration.
As a result, the sonic performance of the ePot.V3 running with LDR attenuation is now at the highest levels we’ve achieved to date.
Minimal control and visual feedback options
The ePot.V3 should is designed to be operated with an Apple remote together with Mini’s built-in encoder. However, you can operate the Mini with only the encoder with a few limitations.
The ePot.V3 Mini will operate without the need for any visual feedback. However, we recommend you employ a status LED which indicates on/off status and briefly flashes acknowledging a control input from the remote. For optimal control and enjoyment we recommend the visual feedback provided by our menu driven graphical OLED display.
Hardware, operation and control manuals
A more comprehensive description of the Mini’s hardware, installation, operation, and controls can be found in the following online documentation:
ePot.V3 Mini & Max operation and controls manual
ePot.V3 specifications
The following table is a fairly comprehensive listing of the specifications of the V3 hardware is NOT specific to the ePot.V3 Mini; such information will be posted once it becomes available.
| Criteria | |
|---|---|
| Attenuator/preamp type | Passive electronic stepped attenuator & preamp controller. There is no active manipulation of the audio signal by any power supply. The audio signal is optically isolated from the control system. |
| Attenuation module | Operates interchangeably with either a plug-in LDR (light dependent resistor) Attenuation Module or a plug-in Discrete Resistor Attenuation Module * LDR Attenuation Module - 100 0.6 dB steps over a 0 to 60 dB range plus 1 additional muting step. A microcontroller uses 100 stored calibration/attenuation command values for each of the 4 attenuation LDRs for a given input impedance and sends commands for the current volume step to a 4 channel 16 bit DAC that in turn drives 4 independent precision closed loop LDR current controllers. * Discrete Attenuation Module - 127 0.5 dB steps over a 0 to -63.5 dB range plus 1 additional muting step. Selects up to 7 series/shunt pairs of logarithmically arranged discrete resistors per channel to achieve 127 steps of attenuation over a 0 to -63.5 dB range at a fixed 60k input impedance. |
| Gain | Unity (1x) gain - no amplification |
| Buffering | No active or passive input or output stage buffering or coupling |
| Input impedance | * LDR Attenuation Module - 20k by default | may configure up to 9 additional impedance settings each adjustable between 1k and 99k and switch between the settings with live music to optimize input impedance for their system. * Discrete Attenuation Module - 60k fixed |
| LDR Calibration | * ePot.V3 Max - Integrated offline LDR module measurement and calibration against 100 attenuation resistance values that vary depending on the current input impedance setting with results stored in an EEPROM memory located on the plug-in LDR module. Calibration is an offline operation and does not occur during normal operation of the attenuator. Calibration is user initiated by can also be configured for periodic automatic operation when unit is otherwise turned off. Changing an input impedance to a new value within a given setting requires running a calibration cycle at that new value. * ePot.V3 Mini - no built-in LDR calibration |
| Number of Channels | 2 independent channels (stereo) |
| Channel Balance Accuracy | Within 0.5 db over full attenuation range |
| Audio Signal Ground | No connection of signal grounds to power ground within controller, however, audio signal ground must share common ground with power supply via an external star ground point in order for LDR self-calibration feature to function properly. |
| Audio Inputs | Single Ended | ePot.V3 Max - 1 board accommodates up to 6 switchable single-ended stereo (2 channel) inputs ePot.V3 Mini - 1 stereo input only (no input switching) |
| Audio Inputs | Balanced | ePot.V3 Max - 2 boards accommodate up to 6 switchable balanced stereo (2 channel) inputs. With 2 boards it's possible to configure a mix of single-ended and balanced inputs. ePot.V3 Mini - not for balanced audio |
| Audio Input Switching/Isolation | ePot.V3 Max - Input switching via analog switches | typical 2 ohm resistance when on | in excess of 10 megaohms when off | no mechanical relays in signal path. ePot.V3 Mini - no input switching |
| Audio Output Switching/Isolation | ePot.V3 Max - Attenuation LDRs minimize output during muting | Analog switches isolate output signals when undergoing calibration ePot.V3 Mini - No output isolation |
| Total Harmonic Distortion | LDR Attenuation Module - typically less than 0.5% Discrete Attenuation Module - typically less than 0.1% |
| Power Input | 7-30 volts DC rated at 0.5 amp via J1 |
| Power Regulation | Two stage DC-DC regulation | switching regulation followed by linear regulation for 3.3V digital power and split voltage +/-4.5-5 V for analog power |
| Processor | ARM STM32F2 32 bit microcontroller running at 100 MHz |
| Control Input | Remote | Accepts control inputs from infrared silver Apple remote or equivalent remote using 38 kHz NEC protocol and Apple commands | infrared commands received via infrared receiver module attached indirectly via display module or directly to board pins |
| Control Input | Encoder | Accepts control inputs from rotary stepped encoder with integral push button switch | encoder attached indirectly via display or can be attached directly to board pins |
| Control Input | UART | Accepts control inputs from external device using UART serial protocol and specific command codes (available upon request). |
| Display | OLED | Graphic OLED display with an intuitive, easy to use, menu based control scheme. Connects to the board via both J4 header. Requires display jumper across pins at J7.DISP pins. |
| Display | 7-Segment (legacy) | Original dual 2-digit numerical 7-segment LED display can be connected via individual J4 pins although overall functionality is not guaranteed. |
| Display | Status LED | Status LED light | connects to board via J7 |
| Mono Mode | ePot.V3 Max | Rev A - Output switchable between stereo and mono mode via LDR switch | applies on to single-ended audio ePot.V3 Max | Rev B - No mono mode ePot.V3 Mini - No mono mode |
| Firmware | Custom code written in object oriented C++ programming language |
| Firmware Update | Firmware can be updated by invoking a chip resident bootloader that communicates with an extern PC based application. Firmware interface from PC to ePot is via a USB->Serial (FTDI USB->UART) com connection. FTDI communication interface sold separately. |
| WiFi Module | Future ability to plug in a simple WiFi module via J6 that will allow the V3 to be controlled via smartphone app. |
| Printed Circuit Board | High quality nickel immersion gold pads with green solder mask |
| Power | ** Current Draw ** Single board w/ OLED display - 130 ma Dual boards (balanced or dual mono) w/ single OLED display - 210 ma ** Supply Voltage ** 9-30 volts DC |