USB1

This 1 foot cable makes it easy to provide an externally accessible USB connection port to update firmware in a LDR3x Passive Preamp Controller located within an enclosure.

One end of the cable provides a type A USB port that can be attached via 2 screws to a panel. The other end has 5 pin female header that connects to the J8 5 pin male header on the LDR3x board.

For those with a V2 board that already has a micro-USB port board soldered onto the J8 header, you’ll need to first remove that board from the J8 header. We recommend this be done by carefully cutting up the micro-USB port around the pins using a plier/cutter and then using a solder iron to remove any remaining materials from the J8 pins.